In this Tutorial I will show to you configure VPCS to add Pcs and configure Ips for Pcs devices ..
first download VPCS from here
After downloaded you should go to direction : cd /home/username/Downloads/
Then unzip vpcs-0.21a.zip
Now go to cd 0.21a/
Then ls
Then change mode to excutable like that : chmod +x vpcs (32 or 64)
After that type ./vpcs(64 or 32)
Now it will be start like that :
VPCS[1]>
Type 1 for pc1
Type 2 for pc2
Type 3 for pc3
Type 4 for pc4
….
If you want to give ip and subnet mask and gateway like this you should type :
Ip then ip-range then default gateway then subnetmask like that :
Ip 192.168.15.2 192.168.15.1 255.255.255.0
after that type : VPCS[1]> show
to apply all your ips and see what is the LPORT and RPORT ( this import will see later )
Now go to open your gns3 project and go to Edit and choose Symbol manager and choose computer and press on > button to add this to customized nodes and press on computer double click to change the name of this device now go to the top in the Name : and change name to anyname you want and choose from Type : and change it to cloud then press on apply then press on ok ..
now press on the pc it will be appearing for you like this pic
then press on the name of your pc for example press on Emp_1 as you could see the pic
go to NIO UDP like this pic
Now you can touch my Notes about (( LPORT and RPORT )) look at your VPCS to see whats your LPORT and RPORT and vice versa those it mean put LPORT number on RPORT number and put RPORT on LPORT number and in Remote host type your localhost or 127.0.0.1 then press on Add button then Apply then ok Now you are done !
Enjoy !
first download VPCS from here
After downloaded you should go to direction : cd /home/username/Downloads/
Then unzip vpcs-0.21a.zip
Now go to cd 0.21a/
Then ls
Then change mode to excutable like that : chmod +x vpcs (32 or 64)
After that type ./vpcs(64 or 32)
Now it will be start like that :
VPCS[1]>
Type 1 for pc1
Type 2 for pc2
Type 3 for pc3
Type 4 for pc4
….
If you want to give ip and subnet mask and gateway like this you should type :
Ip then ip-range then default gateway then subnetmask like that :
Ip 192.168.15.2 192.168.15.1 255.255.255.0
after that type : VPCS[1]> show
to apply all your ips and see what is the LPORT and RPORT ( this import will see later )
Now go to open your gns3 project and go to Edit and choose Symbol manager and choose computer and press on > button to add this to customized nodes and press on computer double click to change the name of this device now go to the top in the Name : and change name to anyname you want and choose from Type : and change it to cloud then press on apply then press on ok ..
now press on the pc it will be appearing for you like this pic
then press on the name of your pc for example press on Emp_1 as you could see the pic
go to NIO UDP like this pic
Now you can touch my Notes about (( LPORT and RPORT )) look at your VPCS to see whats your LPORT and RPORT and vice versa those it mean put LPORT number on RPORT number and put RPORT on LPORT number and in Remote host type your localhost or 127.0.0.1 then press on Add button then Apply then ok Now you are done !
Enjoy !
No comments:
Post a Comment